VALCOURT FP11 Frontenac

  1. General Details

    Dare to design… the fireplace of your dreams, while being environmentally friendly! Frontenac is not only the name of a grand hotel located in the heart of Quebec City, Canada. It is also the largest fireplace of the Valcourt brand.

  2. Standard Features

    Exceptionally large, the FP11 Frontenac uses advanced technology to reduce air pollution and is already qualifies for Phase II of the US Environmental Protection Agency (EPA) voluntary program for manufacturers of decorative wood burning fireplaces. With particulate emissions below 5.1 g/kg (which is approximately 70 percent cleaner than unqualified models), this model will surely give you elegance without compromising the quality of air.

    The FP11 Frontenac has a guillotine door that disappears in the hearth, allowing you to easily load wood on the fire and have an unrivalled view of the flames.

    The fire screen is also equipped with a guillotine mechanism. You will thus enjoy an open fire in safety when the ceramic glass door is open. Finally, the bare front allows significant flexibility and creativity in the design of your interior décor.

  3. Accessories
    • BLACK ARCHED MASONRY TRIM (GIVES A FLUSH FINISH WITH BRICK OR STONE)
    • BLACK ARCHED NARROW OVERLAP (TO OVERLAP THIN FACING MATERIAL LIKE TILE)
    • BLACK STRAIGHT MASONRY TRIM (GIVES A FLUSH FINISH WITH BRICK OR STONE)
    • BLACK STRAIGHT NARROW OVERLAP (TO OVERLAP THIN FACING MATERIALS LIKE TILE)
    • CLASSIC MOULDED REFRACTORY BRICK PANELS
    • CONTEMPORARY MOULDED REFRACTORY BRICK PANELS
    • HERRINGBONE MOULDED VERMICULITE PANELS
  4. Technical Specs

    GENERAL FEATURES

    Exterior dimension (Depth) 30 13/16″
    Fuel type Dry cordwood
    Recommended heating area (sq.ft.) <1,000
    Firebox volume (cu. ft.) 9.4
    Burn rate >5 kg/h (>11 lb/h)
    Maximum log length 30″
    Log positioning Over width
    Chimney diameter 8″
    Approved for a mobile home installation No
    Shipping Weight 920 lb (417 kg)
    Door type Guillotine, glass with steel frame
    Glass type Ceramic glass
    Glass surface – dimensions (Width X Height) 40 3/4″ x 23 7/8″
    Glass air-wash system Yes
    Overall dimension (Height) 74 3/4″
    Overall dimension (Width) 59 1/2″
    Overall dimension (Depth) 34 1/2″
    Door opening – dimension (Height) 27 1/8″
    Door opening – dimension (Width) 44 1/2″
    Firebox – dimension (Height) 35″
    Firebox – dimension (Width) 31 1/4″
    Firebox – dimension (Depth) 10 3/4″
    Moulded refractory bricks Yes
    Cast iron andirons Yes
    Centre line of flue outlet to the side 29 3/4″
    Centre line of flue outlet to the back 15 3/8″
    USA standard (emissions) ASTM 2515 / ASTM 2558
    USA standard (safety) UL 127
    Canadian standard (safety) ULC-S610
    Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
    Warranty Limited lifetime

    APPROVED CHIMNEY TYPES

    Manufacturiers* Brand Type Diameter
    Selkirk Ultra-Temp (UT) 1″ Solid Pack 8″ (20 cm)
    Selkirk Super Pro (SPR) 1″ Solid Pack 8″ (20 cm)
    Selkirk Super Vent (JSC) 1″ Solid Pack 8″ (20 cm)
    Selkirk Hart & Cooley (TLC) 1″ Solid Pack 8″ (20 cm)
    Selkirk Sure-Temp (ST) 1″ Solid Pack 8″ (20 cm)
    M&G DuraVent DuraTech 1″ Solid Pack 8″ (20 cm)
    M&G DuraVent DuraTech Canada (DTC) 1″ Solid Pack 8″ (20 cm)
    ICC Excel 2100 1″ Solid Pack 8″ (20 cm)
    Metal Fab Temp Guard 1″ Solid Pack 8″ (20 cm)
    Selkirk UltimateOne 1″ Solid Pack 8″ (20 cm)
    Security Chimney ASHT+ 1″ Solid Pack 8″ (20 cm)
    Olympia Chimney Ventis 1″ Solid Pack 8″ (20 cm)
    Security Chimney S-2100 + 2″ Solid Pack 8″ (20 cm)
    M&G DuraVent DuraPlus HTC 2″ Solid Pack 8″ (20 cm)
    Selkirk CF Sentinel (CF) 2″ Solid Pack 8″ (20 cm)
    Selkirk Super Pro 2100 (ALT) 2″ Solid Pack 8″ (20 cm)
    Selkirk Super Vent 2100 (JM) 2″ Solid Pack 8″ (20 cm)
    M&G DuraVent DuraPlus AC Triple Wall 8″ (20 cm)
    American Metal HSS AC Triple Wall 8″ (20 cm)
    American Metal HS AC Triple Wall 8″ (20 cm)

    * Specific components may be required depending on the chimney manufacturer.

    Minimum clearances to combustibles*
    (Data expressed in inches. 1 inch = 25.4 mm)
    Canada USA
    Clearance – top (measured from the platform on which the appliance is installed)** 84″ 84″
    Clearance – combustible top shelf to unit 52″

    * The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner’s manual, catalogues, flyers, magazines and/or web sites).

    ** Some appliances have been tested with a low ceiling. If necessary, consult the owner’s manual for information on these clearances to combustible materials.

  5. Related Products